Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
AVANTOR MASTERFLEX (VWR LLC) Ismatec Pump Tubing, Gore STA-PURE Series PFL, 3.2 mm ID x 8 mm OD; 355 mm L
Applications: Chemical and pharmaceutical applications. Characteristics: High resilience and strength, low spallation and gas permeability. Opaque. Certifications: USP Class VI compliant, manufactured in Class 7 (ISO 146441-1) cleanroom, under cGMP certified to ISO 13485 and 15378. Temperature range: 0 to 150¿C (Series PFL) Sterilize: Autoclave, CIP/SIP Series PFL tubing is designed to withstand pumping aggressive chemicals with a composite structure made of platinum-cured perfluoroelastomer and ePTFE. Long-term testing showed pumping common organic solvents (acetic acid, acetone, and ethanol) at 10 psig did not reduce the pumping life of the tubing compared with pumping deionized water at the same pressure.
AVANTOR MASTERFLEX (VWR LLC) Polyimide tubing, 0.0340""ID x 0.0380""OD, five 12""L/pack
Polyimide tubing, 0.0340"ID x 0.0380"OD, five 12"L/pack, Applications: Use as an electrical and thermal insulator, for fluid and gas delivery, or as a tough sheath for glass fibers.Characteristics: Excellent chemical, heat, radiation, and abrasion resistance; high dielectric strength. Clear amber.Certification: Resin meets USP Class VI requirements and NEMA standards.Temperature range: ¿418 to 896degF (¿250 to 480degC)Sterilize: With autoclave, ethylene oxide, or gamma irradiation.
Accuflow Systems Saint-Gobain Tygon Vinyl Tubing, 1/2 in ID, 1/16 in Wall
Clear vinyl (PVC) tubing engineered for reliable fluid transfer and chemical dispensing in laboratory and industrial settings. Flexible and resilient, supplied in 50 ft rolls and sized for common push-fit and barbed connections.
- Clear vinyl (PVC) construction.
- 1/2 in inner diameter, 5/8 in outer diameter, 1/16 in wall thickness.
- 50 ft per package length.
- Resistant to many inorganic acids and bases.
- Operating temperature range -60°C to 135°C.
- Flexible for easy routing and secure fittings.
Cole-Parmer C-Flex 072 TPE Tubing, 1/4" ID x 7/16" OD, 50 Ft; Saint Gobain 072-250-3
Excellent heat seal and sterile weld capabilities make it ideal for biopharmaceutical applications
Easily meet the critical demands of pharmaceutical and biopharmaceutical applications with C-Flex TPE tubing. This moldable and bondable tubing is specifically designed for aseptic welding connections and sealing disconnection; seal or weld before or after sterilization depending on your application requirements.
Excellent flexibility and durability offer prolonged service life in peristaltic pumps and help minimize downtime due to tubing failures. The low permeability characteristics protects sensitive fluids from gas ingress.
SCP Science FLARED TUBING ORANGE/BLU 12PK
This item has a minimum qty of 2 per supplier requirements.
Flared Tubing, PVC Or/Blue 2 stop (12)
Accuflow Systems Saint-Gobain Tygon Medical Tubing, Microbore, Non-DEHP, 0.050 in ID
Tygon ND 100-80 medical microbore tubing is a clear, non-DEHP thermoplastic tubing designed for precise small-diameter fluid transfer in medical and laboratory systems. The tubing balances flexibility and dimensional stability for use in infusion lines, catheters, and microfluidic assemblies.
- Inner diameter: 0.050 in (1.27 mm).
- Outer diameter: 0.090 in (2.29 mm).
- Wall thickness: 0.020 in (0.51 mm).
- Length per package: 500 ft.
- Material: non-DEHP thermoplastic (TOTM plasticizer) for reduced phthalate migration.
- Suitable for catheter tubing, intravenous/intra-arterial infusion, cannulas, and protective sheaths.
- Can be thermoformed and flared for fabrication into cannulas and sheaths.
Accuflow Systems Saint-Gobain Tygon Tubing, E-3603, 7/16 In ID, 9/16 In OD, 50 Ft
Saint-Gobain Tygon E-3603 tubing is a crystal-clear, flexible thermoplastic tubing engineered for medical, diagnostic, and laboratory fluid-transfer applications. It combines high dimensional tolerance, resistance to flex-fatigue, and a glassy-smooth inner bore to minimize buildup and carryover, while its non-oxidizing, non-contaminating formulation reduces extractables for reliable reagent handling.
- Crystal-clear thermoplastic construction for visual inspection
- 7/16 in (11.1 mm) inside diameter, 9/16 in (14.3 mm) outside diameter
- 1/16 in (1.6 mm) wall thickness, 50 ft (15 m) length
- BPA- and phthalate-free, biocompatible, non-toxic
- Glassy-smooth inner bore resists buildup and reduces carryover
- High dimensional tolerance and resistance to flex-fatigue for reproducible fluid transfer
- Non-oxidizing, non-contaminating formulation minimizes extractables
Accuflow Systems Saint-Gobain C-Flex Tubing, TPE, 3/8 in ID, 5/8 in OD
C-Flex 374 TPE tubing is a pharmaceutical-grade thermoplastic elastomer tube formulated for bioprocess and laboratory fluid transfer. It is intended for aseptic welding and sealing disconnection in single-use assemblies, offering flexibility and reduced permeability compared with silicone.
- Pharmaceutical-grade thermoplastic elastomer (TPE).
- Translucent tubing, 0.375 in ID x 0.625 in OD.
- Supplied as a 350 ft coil.
- Sterilizable by gamma irradiation, X-ray irradiation, and autoclave.
- Remains flexible from -45°C to 135°C (-50°F to 275°F).
- Complies with USP Class VI and applicable ISO standards; animal-derived component-free.
- Designed for aseptic welding, sealing disconnection, and single-use assemblies.
- Lower permeability than silicone, suitable for high-purity fluid transfer.
Accuflow Systems Tygon Tubing, 3/16 in ID, 7/16 in OD, 50 ft
Tygon E-3603 tubing is a crystal-clear, flexible laboratory tubing designed for medical, diagnostic, and general-purpose fluid transfer where chemical compatibility, visual inspection, and dimensional consistency are required.
- Inner diameter: 3/16 in (4.8 mm)
- Outer diameter: 7/16 in (11.1 mm)
- Wall thickness: 1/8 in (3.2 mm)
- Package length: 50 ft (15 m)
- Material: thermoplastic elastomer tubing
- Durometer: 56 Shore A
- Maximum working pressure (73°F): 47 psi (3.2 bar)
- Temperature range: brittle temperature -51°F (-46°C); maximum recommended operating temperature 165°F (74°C)
- Color: crystal-clear
- Typical applications: medical and diagnostic systems, IVD analyzers, instrumentation fluid transfer
- Additional properties: low extractables, resistance to flex-fatigue, phthalate-free and BPA-free formulation
AVANTOR MASTERFLEX (VWR LLC) 3-STP PHARMED 1.02MMID 12PK
Masterflex Ismatec Pump Tubing, 3-Stop, PharMed BPT, 1.02 mm ID; 12/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) 3-STP VITON 1.65MMID 12PK
Masterflex Ismatec Pump Tubing, 3-Stop, Viton, 1.65 mm ID; 12/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) TUBING MFLEX PHARMED 73 150FT
Masterflex I/P Precision Pump Tubing, PharMed BPT, I/P 73; 150 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) TUBING MFLEX PHARMED 24 300FT
Masterflex L/S Spooled High-Performance Precision Pump Tubing, PharMed BPT, L/S 24; 300 ft, Avantor